TPU (Tanks n Planes Unlimited)

A few months ago, when BF42 servers everywhere (including TPU) were being hit by a nasty exploit, I discovered this web site: http://bfmods.com

Several of the site's contributors are adept at patching the server software, and they came up with a patch to prevent the hack. I applied the patch to the TPU server and the hacks stopped.

There's plenty of other useful information on the web site, including server-side modding, as well as modding tools. Check it out!

I'm taking the TPU server (Hubie) offline to reinstall that heat sink. Hopefully it won't take more than about 30 minutes to complete. With warmer weather upon us, I just couldn't put it off any more.

Sorry for any inconvenience.

UPDATE: and we're back up. Went faster than I expected, given that I had to remove the motherboard and fire up the soldering iron.

The TPU rules have been updated. Some of them were out of date, others needed clarification. A few few new rules have been added. Please take a few minutes to read them:
http://jdrgaming.com/geeklog/forum/vi...howtopic=3

If you have any comments or concerns about the new rules, feel free to comment on this post or contact me via email.

The TPU stats process has been failing recently. Thanks to Sisko for pointing it out. Some stats are getting through, but not all of it. I've located the problem (a corrupted DCFinal log) and dealt with it. I'll check what happens after the next stats update about an hour from now. Stay tuned...

UPDATE: the 3am stats run failed. I finally tracked the problem down to the fact that some of the BF42 event log files are getting really big, and the Java run-time was choking on them and crashing. I increased the amount of memory available for the stats parser and that seems to have solved it. All pending logs were processed. Some of the data is actually from a few months ago.

I recently took the TPU server offline briefly to blast out all the dust that had accumulated in its fans, heatsinks, vents and so on. While I was in there poking around, a heatsink fell off one of the motherboard's main chipset chips. It's a fairly large, metal heatsink that was held on by two springy metal clips. I was unable to reattach it, because one of the loops on the motherboard to which the clips are supposed to attach appeared to have fallen off.

At the time, it looked to me like the heatsink had never been attached properly and had simply been held in place by a large bundle of wires nearby. Some web research revealed that this particular motherboard has a design flaw whereby the loops on the motherboard are made from a material that doesn't hold solder very well. The result is that after a lot of heating/cooling cycles, the clips tend to pop out.

Meanwhile, I left the heatsink off and fired up the server again. It doesn't seem to be having any overheating problems, but I want to reinstall that heatsink as soon as possible. Although running the Battlefield 1942 server software doesn't really put much of a strain on the server, I just don't think it's a good idea to run it like this.

I have a solution to the heatsink attachment problem, but it will involve taking the server off-line for up to an hour. This has to be done while I'm awake (for obvious reasons) but I want to avoid interfering with TPU players as much as possible. So here's a question (answer in the comments): what do you think would be the best time to take the server off-line for an hour? Make sure you include time zone in your reply. My 'awake' hours are typically 5am to 9pm PST (yes, I know, I'm weird).

Sisko recently pointed out that a new mod called "Forgotten Hope Revisited" was released on March 30. The original FH developers stopped work on the BF1942 mod some time ago, in favour of the FH mod for BF2. Which was unfortunate, since FH on BF1942 had a lot of promise, but was just too buggy to run on TPU.

You can read about the new mod here:
http://www.moddb.com/mods/fhrmod

The FHR modders are adding units, but they are also improving graphics and sound, and fixing bugs.

So, the question is: should we try it on TPU, or should we maybe wait until the bugs have been sorted out?

There's a new poll about a suggestion that was posted in the forums: using a wildcard day for dogfighting training and practice. TPU dogfighting day! You can see the discussion here:
http://jdrgaming.com/geeklog/forum/vi...wtopic=343

Check it out and vote on the poll! The polls are in the right column - scroll down a bit to see them.

DarkRyda and Sisko finished the challenge #1 video and it's posted on the challenge #1 page.

http://jdrgaming.com/geeklog/staticpa...bchallenge

Thanks, guys!

I've removed DCX_refinery from the DCX map rotation since it was causing repeated server crashes. Thanks for the crash report, Sisko!

I've removed the map '4309 - Aces Over Italy' from the BG42 map rotation as it was causing excessive lag.